Do You Need To Paste Non Woven Wallpaper

The process of hanging or installing non-woven wallpaper is generally easier compared to traditional wallpapers, as it often involves a paste-the-wall technique rather than pasting the back of the wallpaper. However, the exact instructions can vary depending on the specific product you have purchased.

Prepare the Wall:

Ensure that the wall is clean, smooth, and dry. Repair any cracks or imperfections, and sand the surface if necessary.
If you're covering an existing wallpaper, remove any loose pieces and make sure the surface is flat.
Measure and Cut:

Measure the height of your wall and add a few inches to allow for trimming.
Cut the wallpaper strips, ensuring they are straight and match the height of the wall.
Apply Paste to the Wall:

Some non-woven wallpapers require you to apply the adhesive directly to the wall. Follow the manufacturer's instructions for the specific paste they recommend.

If the wallpaper is paste-the-wall, use a roller or a brush to apply the adhesive evenly.
Hang the Wallpaper:

Align the top of the wallpaper strip with the ceiling or a plumb line.
Smooth the wallpaper onto the wall, using a wallpaper brush or smoother to eliminate air bubbles and wrinkles.
Trim excess wallpaper at the top and bottom using a sharp knife or scissors.
Repeat for Additional Strips:

Repeat the process for each wallpaper strip, ensuring that the patterns match up correctly.
Overlap or Butt Joints:

Depending on the type of non-woven wallpaper, you may need to decide whether to overlap the edges or create butt joints.
Allow to Dry:

Allow the wallpaper to dry completely. The drying time can vary, so follow the manufacturer's instructions.