What are the precautions for wearing protective clothing?

1. The protective clothing shall be inspected and air pressure tested to confirm that there is no defect, and the protective clothing shall be selected according to the purpose.

2. Anti fogging agent shall be applied to the inside of the goggles of protective clothing according to the recommended instructions.

3. Select two "cooperative organizations", that is, another person helps when wearing protective clothing.

4. The underwear should be worn inside the protective clothing. It is recommended to wear long sleeves and trousers, or long "underwear". Consider wearing fire-resistant underwear.

5. Remove personal items that may damage the protective clothing, such as pens, badges, jewelry, etc.

6. Take off shoes, rubber boots, etc., and do not wear shoes outdoors.

7. Roll the trouser legs into the stockings so that you can easily wear the trouser legs and long rubber boots of the protective suit.

8. If a self-contained air breathing device is used, check and install the device, complete all connections, and adjust according to the manufacturer's requirements. Unless required by the breathing device, do not wear a mask temporarily.

9. If the breathing tube air supply system is used, check and complete all connections and commissioning. Unless required by the breathing device, do not wear a mask temporarily.

10. Put two legs into the protective clothing while sitting.

11. Put two feet into the coat and boots, and pull down the splash shield on the boots.

12. Open the air supply device, put on the mask, and make sure the air supply system works normally.

13. Stand up and tie the inner belt, if any.

14. Put the arm and head into the protective suit, close the zipper, and then close the zipper to cover.

15. Ask an assistant to check whether the zipper and zipper cover are fully tightened, whether the vision of the mask is clear, whether all air pipelines are tightly connected, and whether the protective clothing is in good working condition.